The low standby power requirements and cost effective small batteries allow the panel to be mounted in a small, discrete enclosure which is available in red or grey. A simple programming method using just three front panel buttons enables an extensive list of configuration options to be set and reviewed.
Single board construction allows easy removal of all electronic parts by removing just two screws to provides ample provision of cable entry knockouts to simplify installation. 4 Amp notification appliance power and built-in selectable sync protocols provide ample power and control for a wide range of standard notification appliances.
The built in RS485 communications bus provides the facility to connect four-wire annunciators or ancillary relay boards to provide further indication and control options throughout a premise.
The optional DACT allows dual line reporting to central stations and provides a 500-event history buffer.
The simple and intuitive programming interface on Sigma A-CP panels allows simple configuration of many parameters by entering simple codes which are listed on the inner door look up table and in the operation and maintenance manual.
Sigma A-CP control panels have a dedicated ‘two-wire’ serial bus for connection of repeater panels, ancillary relay boards or zonal sounder extension boards. Up to seven units may be connected to the serial bus which can be up to 1200 metres in length.
The elegant and simple construction of the panel enables the chassis to be completely dismantled by removing just two screws.
Click to download the documentation
Sigma A-CP UL Listed conventional control panel datasheet
UL Listed Conventional Control Panel (Installation Manual)
The Sigma A-CP Annunciator provides remote status indications of the Sigma A-CP Fire Control Panel for fire, trouble and supervisory conditions. The annunciator provides connections for 24 VDC power and RS 485 communication.
The Sigma A-XT Ancillary Board is compatible with all Sigma A-XT control panels. The board provides volt-free, normally-open contacts, enabling control of sub-systems and plant remotely from the main panel over a two-wire data bus.
